Подходит для Ford Mazda, 3/4-кнопочный автомобильный ключ-пульт дистанционного управления CWTWB1U345, частота 315/433 МГц

产品均不带任何logo或标志，适合做出口欧美国家，不涉及品牌侵权。

适合各大电商平台，诚邀大家购买。

产品详情：

状态：100%全新

材料：abs+金属

颜色：如图所示

重量：约0.03kg

按钮：3/4键

电池：有

未切割胚：无

电路板：有

频率：315MHz/433MHz

适用车型：

适用于福特

如有需要，请随时联系我们。我们会在看见信息后答复您。

如何编程更换钥匙遥控器：

方案 1：

1.关闭所有车门，然后打开驾驶员车门，在车门打开时按下驾驶员车门上的解锁按钮，并将钥匙插入点火装置。

2.在 8 秒钟内将点火开关从 “OFF”（关闭）转到 “RUN”（运行）8 次，第 8 次以 “RUN”（运行）结束。门锁将循环以确认编程模式。(如果门锁不循环，则说明操作有误。您必须拔下钥匙，从步骤 1 开始重新编程）

(Off是可以拔出钥匙的位置，RUN是刚要启动汽车的位置）。

3. 在 10 秒钟内按下第一个要编程的无钥匙遥控器上的任何按钮。门锁将循环确认编程。如果只有一个遥控器，则跳至步骤 5。

4. 在 10 秒钟内，按下第二个无钥匙遥控器上的任意按钮。门锁将再次循环以确认编程。对所有其他遥控器重复步骤 4。

5. 关闭点火开关。门锁将再次循环以指示编程模式结束。

*如果无效，请在车门关闭的情况下尝试该步骤。

方案2：

1. 系好安全带，关闭所有车门

2. 在 3 秒钟内将点火开关从 “OFF（关闭）”转到 “RUN（运行）”4 次。

3. 关闭点火开关。系统将鸣响以确认编程模式。

4. 4. 在 10 秒钟内，按住第一个无钥匙遥控器上的任意按钮。系统将鸣叫一次以确认编程。

5. 5. 10 秒钟内，按住第二个无钥匙遥控器上的任意按钮。系统将鸣叫一次以确认编程。

6. 将点火开关转到 “RUN”（运行）位置，退出编程模式。

请注意

所有步骤应快速连续进行。如果没有听到初始鸣叫或门锁循环，则表示车辆从未进入编程模式。您应该从点火装置上拔下钥匙，打开并关闭车门，然后重新开始。

如有任何问题，请随时告诉我们，谢谢！

所有商品均为实拍照片，未从互联网下载，请安心购买。

色差说明：

因拍照的背景、光线、及电脑显示器还原度的不同而造成的商品色差和色彩会有所不同。

以上因素造成的色差不在可控范内，不属于产品的质量有问题。

请以商品实物为准。

如果您介意轻微色差及小瑕疵，请仔细考虑后再订购。

The products don't carry any logos or signs and are suitable for export to European and American countries without any brand infringement.

Suitable for major e-commerce platforms, we sincerely invite everyone to purchase.

Specification:

Condition:100% Brand New

Material: abs+metal

Color: show the picture

Weight:about 0.03kg

Button:3/4 Buttons

Battery:with

Uncut Blade:NO

Circuit Board: with

Frequency:315MHz / 433MHz

Fit:

for Ford

Please feel free to contact us if you need. We will reply to you when we see the message.

How to Program your Key Fob Replacement:

Option 1:

1.Close all doors, then open driver’s door and press the Unlock button on driver’s door while it is open and insert key into the ignition.

2.Turn ignition from OFF to RUN 8 times within 8 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm programming mode. (if the door locks do not cycle, then it was done incorrectly. You must start over by removing key and beginning from step 1)

(Off is the position where you can remove your key, RUN is the position just shy of starting your car.)

3. Within 10 seconds press any button on the first keyless remote to be programmed. Door locks will cycle to confirm programming. If you only have one remote then skip to step 5.

4. Within 10 seconds, press any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat step 4 for all other remotes.

5. Turn ignition to OFF. Locks will again cycle to indicate the end of programming mode.

*If this does not work try the procedure with the door closed.

Option B:

1. Fasten seatbelt and close all doors

2. Turn the ignition from OFF to RUN 4 times within 3 seconds.

3. Turn the ignition OFF. The system will chime to confirm programming mode.

4. Within 10 seconds, press and hold any button on the first keyless remote. The system will chime once to confirm programming.

5. Within 10 seconds, press and hold any button on the second keyless remote. The system will chime once to confirm programming.

6. Turn ignition to RUN to exit programming mode.

Please note:

All steps should be performed in rapid succession. If you do not hear the initial chime or door lock cycle, this means the vehicle never entered programming mode. You should remove the key from ignition, open and close the door and start over.

Please feel free to let us know if you have any questions, thank you! 

All items are real photos, not downloaded from the Internet, please buy with peace of mind.

Color difference description:

1.Due to the background of the photo, light, and computer monitor reproduction degree of the different products caused by the color difference and color will be different.

2.The color difference caused by the above factors is not controllable, does not belong to the quality of the product has a problem.

3.Please take the goods in kind shall prevail.

4.If you mind the slight color difference and small defects, please consider carefully before ordering.