Квантовый магнитно-резонансный анализатор здоровья тела JYTOP 9D NSL

Описание

9D NSL quantum magnetic resonance body health analyzer

Preparation before installation:
1. Self-equipped computer, professional, preferably not for other purposes;
2. Install a clean WINDOWS system.
3. Try not to use 360, Rising, Norton, Kaspersky and other security guards and anti-virus software.
 Installation requirements:
1. Requirements for the software environment
Minimum hardware configuration required for NLS systems:
A recommends using Inte1 Ce1eron D310 2.13GHz or higher CPU;
B requires 2G memory for Windows XP systems; 4G memory is required if you want to run other applications;
C for Windows 7, Windows 8, need more than 2G memory; if you want to run other applications, you need 4G or more memory;
The D display requires a 14-inch or more VGA or higher display.
E hard disk needs more than 4G space, the software is installed in the system disk.
2. Requirements for the software environment
The NLS system can be used on Windows XP, Windows 7 and Windows 8, Windows 8.1, and Windows 10. Compatible with 32 and 64 bit systems.
 Installation precautions:
1. Be sure to copy the contents of the CD to your computer for storage. (Do not have the system disk of the computer, and do not install it directly with the CD).
2. Step 2: You must first insert the encryption key U key and connect the device to the computer.
3. If it is not installed, please contact customer service to install.
The instrument link description:
Before using the instrument, please confirm that the following is correct:
1, POWER: instrument power switch
2: USB connection and computer USB port link
3: Connect the item cup
4: Connect the headphone sensor
The correct operation process:
1. Before the instrument is turned on, please confirm that the instrument is connected to the USB port of the computer.
2, the instrument should be turned on when the computer is running
3. At the same time that the power is turned on, the power (P) lamp on the instrument will light up and begin to automatically calibrate the instrument. The N lamp and P lamp of the instrument will flash when the calibration is completed. After the flashing, the N lamp and the P lamp will go out, and the power (P) lamp will be on.
Before starting the software, be sure to ask the subject to wear the “headphone sensor”. Otherwise, an error message will appear when the software starts, which may cause it to be undetectable. This step is very important. Please wear the headset first.

Accessories:

   1. 9D NLS Analyzer X1

   2. Headset type sensor X1

   3. Testing Cup X1.

   4. USB cable X1

   5. Operating manual X1

   6. DVD software X1

   7. Aluminum box X1