Тестовая ручка для тормозного масла автомобиля/диагностический детектор тормозной жидкости DOT3/4/5.1 тестовый тестер тестовой ручки

Описание

   我司所生产的刹车油检测笔产品的外壳材质为纯尼龙料，相对于市面上的ABS材质的外壳来说，我们的产品外壳可以做到防腐蚀，因为刹车油具有很强的腐蚀性，而尼龙料可以耐腐蚀，如果是ABS材质的外壳，在实际使用过程中靠近测试探头的塑料部分碰到刹车油后，外壳表面会被刹车油腐蚀溶解，时间久了外壳会粉碎，不符合出口的品质标准，导致客诉退货。

The shell of the brake fluid tester produced by our company is

made of nylon material. Compared with the shell made of ABS on the market, the shell of our product can be anti-corrosion, because the brake oil is highly corrosive. Nylon material can resist corrosion，If it is an ABS shell, when the plastic part close to the test probe touches the brake oil during actual use,The surface of  shell will be corroded and dissolved by the brake oil. Over time, the shell will be smash, which does not meet the export quality standard, resulting in customer complaints of return.

    我司产品符合出口标准,过了CE和ROHS认证，保证正品，产品有专利，保证质量，保证货源，保证售后！店铺内所展示的产品单价为PE透明袋子包装，如需带吸塑插卡样式包装或带电池，请旺旺上联系确认包装以及带包装的单价后再拍，谢谢！

Products meet export standards and have  passed CE and ROHS certification to ensure authenticity, quality, supply and after-sales service! The unit price of the product displayed in the store is the unit price of PP transparent bag packaging. If you need to pack with a blister packaging, Please contact salesperson to confirm the  price of blister packaging,thanks.

制动液测试仪5 LED车载汽车汽车测试工具

注意：
1：每次测试后，需要用干布或纸清洁测试探头。
2：由于国际航空运输的原因，我们不会提供电池。如果您需要提供包装带电池，请旺旺上联系。

产品介绍：
制动液测试仪适用于确定制动液质量。
制动液测试仪是根据电导率的变化来确定制动液的湿度变化情况。通过发光二极管清楚显示湿度。高含量的水分会降低沸点，然后影响汽车的制动性能。红色表示制动液需要立即更换，绿色表示制动液状况良好，黄色表示制动液保持良好，但会改变。

产品无电缆连接器，使用方便
电源：1.5V“AAA”x 1
适用于DOT3 / DOT4测试

使用方向：
5个LED指示制动液中的水％：
0％LED：制动液中有水分含量
1％LED：含水量，H2O≤1％，制动液高于标准
2％LED：含水量，H2O≤2％，仍可使用
3％LED：含水量，H2O≤3％，制动液建议更换
4％LED：含水量，H2O≥4％，制动液必须更换

打包清单：
1 x制动液测试仪

1.产品不带包装尺寸：直径20MM,长155MM,

2.产品吸塑插卡包装尺寸：218X70MM

2.产品PE袋包装重量为35克，吸塑包装后的重量为50克。

Brake Fluid Tester 5 LED Car Vehicle Auto Automotive Testing Tool

Note:
1：After every testing,you need clean the test head with dry cloth or paper.
2：Due to the cause of international air transport, we will not provide the battery.

Product Introduce:
The brake fluid tester is suitable for determining brake fluid quality.
Brake Fluid Tester is according to the variation of electrical conductivity to determine the moisture content of the brake fluid change.It through the light-emitting diodes clearly shows the degree of moisture. High content moisture will reducing the boiling point, and then affect the braking performance. Red indicates brake fluid need to be replaced immediately, green indicates brake fluid in good condition, yellow indicates brake fluid stays good, but is going to change.

Designed without cable connector
Fast and convevient
Power supply: 1.5V "AAA" x 1
Suitable for DOT3 / DOT4 testing

Directions for using:
5 LEDs indicating the water % in the brake fluid :
0% LED:there is on water content in brake fluid
1% LED: Water Content, H2O≤1%, brake fluid is above standard
2% LED: Water Content, H2O≤2%, still can use it
3% LED: Water Content Water Content, H2O≤3%, brake fluid should be changed
4% LED: Water Content Water Content, H2O≥4%, brake fluid must be changed

Packing List:
1 x Brake fluid tester